#1 [↑][↓]  09-08-2023 19:55:12

Fuchs
Pilote Virtuel
Membre donateur
Lieu: EBLG - EBTX
Date d'inscription: 25-10-2009
Renommée :   97 

[MSFS]Sim Update 13 Beta

la release note vient d'être publiée avec pas mal de bonnes choses.

https://forums.flightsimulator.com/t/si … 023/604327

Bonne lecture

Comme d'hab, une update via Xbox et une autre de +-18Go ingame

Dernière modification par Fuchs (09-08-2023 20:19:42)


Amat Victoria Curam
I7 9700k @5.0Ghz / Asus Z390 / MSI 1080ti GamingX / 32Go RAM /Samsung 4K 49" / Rift S / etc, etc, etc...

Hors ligne

 

#2 [↑][↓]  09-08-2023 19:57:35

Loader
Copilote
Date d'inscription: 14-07-2017
Renommée :   23 

Re: [MSFS]Sim Update 13 Beta

Bonjour,

Normalement c'est dispo pour ceux qui veulent tester.

Hors ligne

 

#3 [↑][↓]  09-08-2023 20:07:06

Fuchs
Pilote Virtuel
Membre donateur
Lieu: EBLG - EBTX
Date d'inscription: 25-10-2009
Renommée :   97 

Re: [MSFS]Sim Update 13 Beta

oui, je confirme, ca s'installe :)


Amat Victoria Curam
I7 9700k @5.0Ghz / Asus Z390 / MSI 1080ti GamingX / 32Go RAM /Samsung 4K 49" / Rift S / etc, etc, etc...

Hors ligne

 

#4 [↑][↓]  09-08-2023 21:41:55

chessgame80
Commandant de bord
Date d'inscription: 18-10-2022

Re: [MSFS]Sim Update 13 Beta

Bonsoir,

pour le rappel, la Sim Update 13 finalisé sera dispo le 21 Sept.


Win 10, I7 -7700K 4.2Ghz, GeForce  GTX 1080 Ti, RAM Corsair DDR4 32Go - 3200Mhz, 2 SSD M.2 NVMe, écrans 40" et 21"
MSFS Premium Deluxe | version Store, P3DV5, XP12

Hors ligne

 

#5 [↑][↓]  10-08-2023 09:20:25

gordon24
Copilote
Date d'inscription: 10-04-2014
Renommée :   

Re: [MSFS]Sim Update 13 Beta

Pas mal de nouveautés intéressantes en effet.
Par contre n'etant pas téméraire et ayant un DSL assez faible, j'attendrai le 21 Septembre.

Hors ligne

 

#6 [↑][↓]  10-08-2023 18:08:04

Panzer!
Pilote confirmé
Lieu: Montpellier
Date d'inscription: 03-01-2014
Renommée :   

Re: [MSFS]Sim Update 13 Beta

Maj installée hier, MSFS démarre sans soucis avec mon Community de 275Go et quelques petits vols également !


Fidèle depuis FS2002 et CFS1 ! LFMT Montpellier Méditerranée et amoureux du 707 et du DC-8
MSFS (pseudo : PANZERFR)
Mais aussi : IL2, Trainz, Silent Hunter, EU IV, HoI IV, Enlisted, War Thunder, KCD, Civilization, etc. Et maquettisme
Ryzen 7 7800X3D - 32Go 6000Mhz DDR5 - RTX 4090 - 34" 3440*1440 240Hz

Hors ligne

 

#7 [↑][↓]  22-08-2023 22:07:16

Panzer!
Pilote confirmé
Lieu: Montpellier
Date d'inscription: 03-01-2014
Renommée :   

Re: [MSFS]Sim Update 13 Beta

Nouveau build :

https://forums.flightsimulator.com/t/si … u=panzerfr

General Bug Fixes
Fixed an issue where uninstalled standard content would automatically reinstall.
Several crashes have been fixed across the title.
Added logbook compression to fix an issue where the logbook stopped recording flights after reaching 16MB limit size.
Several localization improvements
The dark line that appears on the horizon in some situations is now less visible.
For the AAU_02 update, we made a change to allow control of the cursor with all joysticks and not only with a gamepad. This change had the unintended consequence of causing the central white dot to display when moving the camera or when using a joystick/mouse at the same time. To address the issue, we’ve added two new options to allow players to customize the cursor behavior:

You can access these new options from Options > General Options > Accessibility.

SHOW WHITEDOT CURSOR (Default = ON) : Display or hide the central white dot cursor when the camera moves.
USE CURSOR FOR ALL JOYSTICKS (Default = OFF) : ON will allow all joysticks to control the cursor. If set to OFF, this will be the same behavior as before AAU_02.
Please note this change is only available on PC at this time but will come to Xbox in the next SU13 beta build.

Glass Cockpits
Garmin G3000 / G5000
Fixed an incorrect unit conversion that could cause the MFD navigation data bar ISA field to display incorrect values in Fahrenheit.
Fixed an issue where the FOB SYNC instructions would still appear on the GTC Weight and Fuel page if the page was opened after FOB was already set.
Fixed multiple issues that could sometimes cause the GTC VNAV page and Flight Plan Text Inset not display the correct Active VNAV Waypoint.
G1000 Nxi
Fixed an incorrect unit conversion that could cause the MFD navigation data bar ISA field to display incorrect values in Fahrenheit.
Fixed the issue where the PFD was not showing the VNAV target altitude.
Fixed the issue with waypoint alerter flashing after landing or passing DTO’s.
Fixed multiple issues that could sometimes cause the Active VNAV Waypoint, VSR, and VDEV fields on the MFD FPL page to not display the correct values.
Aircraft
General
Diamond DV-20 GNS Screen made interactable.
CAP10 GNS Screen made interactable.
Boeing 787-10 / Boeing 747-8i
FMC: CLB thrust limit is now retained in cruise, and selected when climbing.
FMC: Selecting a new approach while flying an approach procedure should no longer break the approach speeds in the new approach.
CDU: Clearing a CDU message now clears it on all CDUs.
SYS: Fixed issue where LANDING ALTITUDE message appears when in AUTO.
[747] AP: The bank angle limit used while in HDG SEL mode now properly follows the selected bank angle limit selected on the MCP.
[747] AP: Fixed AUTO bank limit to be max of 25 instead of 30.
[787] EFB: Fixed input from operating system keyboards.
[787] EFB: The wind field on TAKEOFF REF page is now copied to the EFB when initializing the EFB takeoff page.
[787] SYS: Fixed an issue where HIGH CABIN ALT MODE would appear in the wrong conditions.
Daher TBM 930
Fixed an issue where the EIS Ng gauge could report slightly inaccurate values.
VR
Corrected an issue that would cause some Touch enabled glasscockpit not to work in VR mode.
SDK
SimConnect
SimConnect_GetInputEvent and SimConnect_SubscribeInputEvent has been changed to be more explicit. Check documentation for more information
WASM
Added the possibility to register wasm event with a context
Some error messages were missing when a wasm module becomes dirty
[SDK][Wasm] rapidjson has been integrated to the SDK to simplify Wasm-JS communication


Fidèle depuis FS2002 et CFS1 ! LFMT Montpellier Méditerranée et amoureux du 707 et du DC-8
MSFS (pseudo : PANZERFR)
Mais aussi : IL2, Trainz, Silent Hunter, EU IV, HoI IV, Enlisted, War Thunder, KCD, Civilization, etc. Et maquettisme
Ryzen 7 7800X3D - 32Go 6000Mhz DDR5 - RTX 4090 - 34" 3440*1440 240Hz

Hors ligne

 

#8 [↑][↓]  23-08-2023 07:34:55

BERDE
Pilote Virtuel
Date d'inscription: 14-03-2008

Re: [MSFS]Sim Update 13 Beta

Bonjour,

c'est pénible, à chaque update, tous les paramètres enregistrés sont remis à leurs valeurs par défaut ; en tout cas chez moi c'est ce qui se passe .


Carte mère MSI PRO Z790-P WIFI DDR4 LGA 1700 . CPU Intel I7 13700K cache 30Mb  LGA 1700 . Mémoire 32 Go Corsaire VENGEANCE 3200 Mhz . Carte graphique ASUS GEFORCE RTX 3090 24Gb
Ventirad Noctua NH-U 12S . SSD Samsung 2To
X-Plane 12 . Honeycomb  - Thrustmaster TCA -Jostick Airbus . W 10

Hors ligne

 

#9 [↑][↓]  23-08-2023 09:56:31

chessgame80
Commandant de bord
Date d'inscription: 18-10-2022

Re: [MSFS]Sim Update 13 Beta

BERDE a écrit:

Bonjour,

c'est pénible, à chaque update, tous les paramètres enregistrés sont remis à leurs valeurs par défaut ; en tout cas chez moi c'est ce qui se passe .

Bonjour,

c'est exactement ce que j"ai remarqué avec les bêta, raison pour laquelle j'ai cessé de les installer depuis des longues mois, j'attends et j'installe que les  sim update finalisés


Win 10, I7 -7700K 4.2Ghz, GeForce  GTX 1080 Ti, RAM Corsair DDR4 32Go - 3200Mhz, 2 SSD M.2 NVMe, écrans 40" et 21"
MSFS Premium Deluxe | version Store, P3DV5, XP12

Hors ligne

 

#10 [↑][↓]  23-08-2023 10:50:37

Panzer!
Pilote confirmé
Lieu: Montpellier
Date d'inscription: 03-01-2014
Renommée :   

Re: [MSFS]Sim Update 13 Beta

Vos paramètres comme les graphismes, les sons, etc. ?
Bizarre je suis depuis le début dans le canal Béta et je n'ai jamais eu ce souci !


Fidèle depuis FS2002 et CFS1 ! LFMT Montpellier Méditerranée et amoureux du 707 et du DC-8
MSFS (pseudo : PANZERFR)
Mais aussi : IL2, Trainz, Silent Hunter, EU IV, HoI IV, Enlisted, War Thunder, KCD, Civilization, etc. Et maquettisme
Ryzen 7 7800X3D - 32Go 6000Mhz DDR5 - RTX 4090 - 34" 3440*1440 240Hz

Hors ligne

 

#11 [↑][↓]  23-08-2023 13:56:56

JpP
Copilote
Date d'inscription: 30-07-2012

Re: [MSFS]Sim Update 13 Beta

Bonjour à tous.
Mode bourrin ON
  Pas moyen de trouver un lien valide pour le téléchargement. Pas de maj via le jeu, rien de visible sur ma Xbox. Une piste? Merci.
JpP

Dernière modification par JpP (23-08-2023 14:01:25)


Portable MSI, Windows 11, I7 11ème génération, 32 Go RAM, M2 1+4 To, Nvidia RTX 3070 Portable 8Go

Hors ligne

 

#12 [↑][↓]  23-08-2023 14:29:46

Taiaut57
Copilote
Lieu: LFLB
Date d'inscription: 17-03-2008

Re: [MSFS]Sim Update 13 Beta

Bonjour JpP,

c'est une mise à jour BETA, donc il faut s'inscrire pour y avoir accès.
La version normal sera dispo le 21 Septembre si j'ai bien lu.
De mon coté je ne les utilises plus mais je ne sais pas si on peut avec une Xbox?

Tonio


WIN11 - i7-8700 CPU @ 3.20GHz - 32,0 Go - Vega56 - MSFS version DVD - 3 écrans de 27" - 2 écrans de 17"

Hors ligne

 

#13 [↑][↓]  23-08-2023 16:50:36

JpP
Copilote
Date d'inscription: 30-07-2012

Re: [MSFS]Sim Update 13 Beta

Taiaut57 a écrit:

Bonjour JpP,

c'est une mise à jour BETA, donc il faut s'inscrire pour y avoir accès.
La version normal sera dispo le 21 Septembre si j'ai bien lu.
De mon coté je ne les utilises plus mais je ne sais pas si on peut avec une Xbox?

Tonio

Merci Tonio.
Je suis en principe inscrit comme Insider depuis une époque où je m'étais porté volontaire pour une béta ...
Je vais retenter le coup.
JPierre


Portable MSI, Windows 11, I7 11ème génération, 32 Go RAM, M2 1+4 To, Nvidia RTX 3070 Portable 8Go

Hors ligne

 

#14 [↑][↓]  23-08-2023 19:59:29

chessgame80
Commandant de bord
Date d'inscription: 18-10-2022

Re: [MSFS]Sim Update 13 Beta

Panzer! a écrit:

Vos paramètres comme les graphismes, les sons, etc. ?
Bizarre je suis depuis le début dans le canal Béta et je n'ai jamais eu ce souci !

Bonjour,

pour moi, avec les bêta, les options assistance redeviennent toujours par défaut


Win 10, I7 -7700K 4.2Ghz, GeForce  GTX 1080 Ti, RAM Corsair DDR4 32Go - 3200Mhz, 2 SSD M.2 NVMe, écrans 40" et 21"
MSFS Premium Deluxe | version Store, P3DV5, XP12

Hors ligne

 

Pied de page des forums

Maintenance informatique Lausanne