Salut,
Hier soir, je suis tombé sur cette page où les membres apportent leur constat sur la compatibilité des addons connus jusqu'ici. La page est ici: http://forum.avsim.net/topic/426926-p3d … lity-list/

Aircraft Add-ons


Aerosoft Airbus X Extended -- compatible; some growing pains.  See http://forum.aerosof...ility-question/

Twin Otter Extended--compatible(PierreF)

Wilga v1.2--works in P3D2; must run installer in admin mode, point to P3D directory

Bell UH-1D--works with manual install(spirit_66)

Discus X and WinchX--work installed with EMT(w6kd)

Katana 4X--working with EMT, and needs new asc.dll(Dumpcore)

Any Aerosoft acft using old (before 2 Dec 2013) asc.dll sound module will crash if switched between full screen and windowed while panel is running

A new asc.dll module and discussion are available here: http://forum.aerosof...-and-many-more/

Affects AXE, Twotter, Katana and possibly others

Alabeo R66/PA38/Staggerwing D17--Have a P3D setup, must set P3D path manually (Leclercq A)

Ants Aircraft: P92 Eaglet, Drifter A-582, Tecnam Sierra 24, Trojan T28D, Freeware DH82 Tiger Moth 1.1 - All working in P3D2(Leclercq A)

A2A    B377--partially working--no cockpit lights, with cold-start mode engines won't start and some knobs stop working(spesiman)

C172--Should work in in P3D2--put renamed copy of prepar3d.exe as fsx.ex into P3D root dir, then point installer to P3D directory (MarkSC)

Late version FSX/P3D 1.x installer won't work if P3D2 folder name has blanks; disable VC mipmaps in P3D options(jabloomf1230)

Piper Cub--works in P3D2--place copy of Prepar3d.exe renamed fsx.exe into P3D's root folder then run installer(Arwen)

Spitfire--works in P3D2--place copy of Prepar3d.exe renamed fsx.exe into P3D's root folder then run installer(Wendall)

BayTower Vans RV7--need to edit panel.cfg to remove transponder gauge to prevent CTD in P3D2.  See: http://www.baytower....f&t=496#p2462

CaptainSim C-130 pro-pack v1.3--mostly working, radar inop

need fs9.exe in P3D root for installer to work, need fsx.exe in P3D for ACE editor to work(Leclercq A)

B707--OK with EMT(Wendall)

B727--works in P3D2, need to add sound gauge to dll.xml(Dutch727)

B732--works with EMT(Shane_Strong)

B757/767--works with EMT(jaegerm)

B777--works with EMT and P3D in legacy mode(mulgrave/NikkiA)

Carenado B200 King Air--compatible with P3D native installer

B90 Queen Air--compatible with native installer(keithb77)

Cessna 337--compatible with native installer(keithb77)

CT182T w/G1000--compatible, with P3D2-compatible installer(Boylston)

TBM 850--works in P3D2(folie123)

Cera Sim UH-60L BlackHawk--partially working in P3D2 (no digital readouts, analog gauges only) (Jimmy RFR)

Bell 212 & 412--works in P3D2 using EMT(Shane_Strong)

CLS MD-81/82--works installed with EMT

Coolsky DC-9--works in P3D2 using EMT(Q_Flyer)

Super 80 and Super 80 Pro--works by copying from FSX install(drcancerman)

Dino Cattaneo T45 & F-14--works in P3D2--needs copy of FSX FA-18.dll copied from FSX gauges folder to P3D(Jimmy RFR)

Dodosim Bell 206--works in P3D2 with some issues.  See http://forum.avsim.n...-compatibility/

Eagle Rotorcraft Simulation Bell 206 B Jetranger--works with manual installation(spirit_66)

Eaglesoft Citation X--works in P3D2 using EMT, may see lag in gauge loading on first use(Q_Flyer)

Citation CJ1--compatible(dumpcore)

Feelthere Embraer Regional Jets (ERJ 135/145)--works using EMT (Q_Flyer)

E-Jets V1 and V2 both working (Brian Doney)

Flight1 House-developed Aircraft  -- prohibited by EULA

Includes Mustang, B200 King Air, Cessna T182T, BN-2 Islander

Does not necessarily include aircraft produced by other developers marketed via Flight1 wrapper

FSL    ConcordeX--incompatible due to Simconnect version problem, P3D-specific version being considered(MarkW)

Airbus--will not be compatible with P3D on release, p3D specific version being considered(MarkW)

FSX Default Bell 206--works with manual install(spirit_66)

Hovercontrol Bell 412--works with manual install(spirit_66)

IFly B737NG v3.2 for P3D--works with some lighting issues  See: http://www.flight1te...orPrepar3D.aspx

Iris Mudhen Driver F15E with update 1-2--works, must add weapons mgr to dll.xml manually(Leclercq A)

Platinum A10 v1.3--works, with some HUD anomalies--enter P3D2 path in installer(Leclercq A)

BD5,F-20--works in P3D(Dumpcore)

Justflight Lightning F.6--Works in P3D2--copy acft folder from FSX, and effects from effects dir(EngineRoom)

Freemium B757--works with EMT(Spike54)

DC-8--works with EMT(Shane_Strong)

DC-6B--works with EMT(Q_Flyer)

L-1011--works with EMT(Shane_Strong)

Leonardo Maddog 2008--partially working in P3D2; 2D OK, no clickspots in VC(757FO)

Level-D B767 for FSX--works in P3D2(Bryn)

Lionheart - Robin DR400180 FSX/P3D - Runs OK - P3D check box, but you must set path manually (default path P3D 1.x)(Leclercq A)

Fairchild 24 & Super Pacer--compatible with P3D2--set path to P3D inside installer(Jimmy RFR)

Kodiak--works installed with EMT, needs sounds from FSX C208 or 3rd party soundset(RoboRay)

Lotus Simulations L39--works in P3D(dumpcore)  Lotus reports possible issues with lighting and canopy effects

Majestic Q400--working in P3D2--uncheck "mipmap VC panels" in view and panel setting(SamDim)

Dual FSX/P3D install does not work, installing into second FS on same machine prevents other copy from running

Milviz T-38--partially working; No panel flood, instrumentation or external lights.  Needs to be recompiled to fix lights(n4gix)

Baron--partially working after EMT install, no VC clickspots(AviatorMan)

C310--works in P3D2, installer needs to find fsx.exe (copy of Prepar3d.exe is OK) in P3D root(winged532)

F-86--compatible with P3D2(Wendall)

Nemeth EC120B, AS350--compatible(PierreF)

MD 500, EC-130, BO-105, Bell UH 1 Huey--all work with EMT(spirit_66)

AW109, EC355--works installed with EMT, including autopilot(w6kd)

PMDG Aircraft (all) -- currently prohibited by EULA - P3D licensed versions of B777/B737NGX/B744V2 expected ~Q1 2014

Quality Wings RJ-85/100 (P3D V1.x version)--works with P3D2, requires fsx.exe in P3D root to install (juergenmartens)

BAe-146--works in P3D2(juergenmartens)

Cross-compatibility issues with VimaCore.dll in P3D2 causing g3d.dll CTD.  See: http://forum.avsim.n...tibility-issue/

B757--working in P3D2--working with EMT(coryb13)

RealAirSimulations B60 Duke V2, Turbine Duke  & Lancair--works in P3D2, some panel sounds missing (MarkSC/Dionys)

Duke V1--works in P3D2, V1.5 update won't install, manual xfer of files does work(greuff)

Dukev2--possible memory leak/OOM issues in P3D2(MarkSC)

SF260--works in P3D2(Dionys)

Section8 F86--not compatible(Leclercq A)

Sibwings AN-2 Cub--working in P3D2 installed per instructions here: http://forum.sibwing...php?f=29&t=1149

Virtavia C17, CH-47, T-34--Work OK in P3D2(Leclercq A)

Mi24 OK (GPS in terrain mode have a too strong bloom effect at night)

KA54 OK (HUD bloom effect too strong at night)

VRS F-18 Superbug & Tacpack -- currently prohibited by EULA  See http://forums.vrsimu...prepar3d#p59361



AI Aircraft/Traffic Add-ons



ACA 2013--compatible with P3D2 from v0.6.0  See http://aifs2.pvdveen.net/

AIG flightplans--OK if compiled for FSX.  Works with variety of acft, i.e. AIA, AIG, AIM, DJC, HTAI, TFS, FAIB, OSP, etc.(jordanal)

Can reference FSX-installed acft and traffic bgl files by referencing in P3D's prepar3d.cfg and scenery.cfg files

Must still copy over the few respective AI files form \FSX\texture and \FSX\Effects, to the equivalent P3D folders

My Traffic X--works in P3D2, needs to be manually installed(Petraeus)

My Traffic 2013--works with EMT install(ajpongress)

Traffic 360--conflicting reports, see http://www.prepar3d....iewtopic&t=4067

Ultimate Traffic 2--works in P3D2 with EMT

must also change the dll.xml to point to P3D versions of traffictoolbox.dll and visualfxtool.dll (leave object_placement.dll pointing to fsx version)

Installing into P3D will disable use in FSX--program uses registry settings to point to a single installed program folder

WOAI package installer--works in P3D2--need fsx.exe present in P3D root folder for installer to work (copy of Prepar3d.exe renamed to fsx.exe also works)



Aircraft Gauge Add-ons



Ernie Alston's Integrated Simavionics (ISG1)--works in P3D2(RWFeldman)

Project Magenta Boeing glass suite--working (pipsara)

RealityXP (all) - incompatible with P3D



Scenery Enhancement Add-Ons



AES (Aerosoft Airport Enhancement Services) -- incompatible with P3D.  See http://forum.aerosof...and-prepare-3d/

Auto Star X--works in P3D2; point installer to P3D directory(spesiman)

FSGenesis Terrain Mesh--regional meshes seemed to install fine with the EMT(spesiman)

North America V2, Canada, and Mexico V2--work installed with EMT(w6kd)

GEX (all) -- prohibited by EULA

GSX (FS Dreamteam Ground Services X) -- ready for P3D2 with 27 Nov 13 installer

ORBX FTX Global - P3D2-ready as of version 1.1 -- needs new installer if downloaded before 23 Nov 13

FTX Vector Iceland Demo--P3D2 ready

Pilot's FSGlobal 2010 and FSGlobal Ultimate series terrain mesh--P3D v2 installers now available on website

REX Essentials/Overdrive -- P3D2 ready, some restrictions with weather engine.

See http://www.realenvir...ty/#entry206605

REX4 Textures Direct -- P3D2 ready, some pending issues awaiting LM action.  See:  http://forum.avsim.n...-2#entry2886629

UTX (all) -- prohibited by EULA



Scenery Add-Ons



Aerosoft--Matt Smith has a comprehensive list of instructions for setting up AS sceneries in P3D2: http://forum.aerosof...ng-in-prepar3d/

EDDM, LOWI, German Airports 2/3--partially working, lighting inop(guenseli)

LIBD (Bari)--installer does not work, works OK with EMT(spesiman)

Seychelles--partially working, no lights@FSIA, water issues(Bryn)

Mega Airport Stockholm--installs with EMT, performance issues (SAS443)

Ala12v Torrejon AB--dev says partially working, no lights and shadow issues.  Fix anticipated early 2014(mickyleitor)

Drzewiecki Krakow--works in P3D2(Q_Flyer)

New York City--partially working with EMT, some texture issues, black buildings etc(JamesHongKong)

Flightbeam (all)--compatible, new P3D2-ready installers available for download(Mir)

FlyTampa St Maarten -- P3D2 ready from version 1.6

Most should work, new installers coming.  See http://www.flytampa.org/forum/viewtopic … amp;t=6432

OMDB/LOWW/LGAV/CYUL/KBOS V3 confirmed working(Q_Flyer)

OMDB V2.2 installer P3D2 ready

FSDreamTeam--New P3D2-compatible installers for all FSDT sceneries available

Some P3D2-specific issues w/r/t performance(esp older sceneries), lighting (LSGG)

Holger Sandmann Tongass Fjords X--works installed with EMT(Holland_Holland)

Imaginesim KSTL--working with EMT

KCLT 2013--partially working, no runway lights(Blaze)

KATL original--does not work, causes AppHang crashes(Blaze)

KDEN--not working (no buildings)  Newer IS sceneries appear to have issues

LatinVFR KMIA--works, but suffers from poor image quality(t_bergman)

LH Simulations Budapest--P3D2compatible from V1.2(Fabo)

MegaScenery Earth--working in P3D2(The Oldar)

MSE North Carolina--works, with some oddities in ramps and taxiways at regional airports(flyerkg)

MSE V2 airports--working in P3D2(OzWhitey)

ORBX--scenery migrator in development, manual installation of regional sceneries possible(bonchie)

PNW installs OK with EMT(Wendall)

SAK--partially works with EMT(no ObjectFLow)

remove or rename the ObjectFlow_SAK.dll file in the P3Dv2/ORBX/FTX_NA/FTX_NA_SAK05_SCENERY folder after installation(RoboRay)

Pacific Island Simulations--Jeju and Xiamen work with EMT (Blaze)

Scansim Copenhagen V3(FSX/P3D)--partially working aith EMT, missing some textures--P3D2 version expected in 2014(volmmer)

SunSkyJet KPHL--compatible with P3D2 (Wendall)

Taxi2Gate Orlando--works in P3D2(coryb13)

MMMX Mexico City V3--OK with EMT(JamesHongKong)

Tropicalsim MDST Cibao--installs with native installer--requires manual addition to scenery library(MisterA)

TileProxy--compatible(PierreF)



Weather Add-Ons



*FSrealWX lite 1.07.1522 by Hanse-Coders--works in P3D2, select Simconnect option (Leclercq A)

*HiFiSim Activesky 2012 -- should work with P3D2, manually set P3D.exe path and directory, P3D-specific beta coming (WR269)

AS2012 works via Simconnect from remote PC--abnormal high OAT issue(RWFeldman)

*Open Clouds -- P3D2 Ready--temp issues should be fixed in V1.16  See http://www.fsopen.co...p?threadid=3250

OpusFSX -- P3D2 ready

Pilot's FS Global Real Weather -- incompatible, P3D-compatible version expected early 2014 (MarkSC)

*REX Essentials/Overdrive -- P3D2 ready; (RWFeldman) (see link in Scenery Enhancement section above)



* - suffers from apparent P3D bug that misreads temp data injected via Simconnect resulting in sky-high OAT, so to speak



Utilities



A2A Accufeel V2.0--working in P3D2(Rob Ainscough)

Aivlasoft EFB--works using same compatility tips as P3D 1.x (see Aivalsoft forums)(Dumpcore)

V1.5.0 is P3D2 ready  See http://www.aivlasoft....php?f=5&t=1512

Cockpit Sounds V2 (COCKPITSOUNDS_V2.ZIP by Daniel Gauthier) works(Holland_Holland)

DBS Airport GPS--OK installed with EMT(muffo)

EditVoicepack compiled EvpAccelerated3.gvp file works well. Drop into ..\Prepar3D v2\sound\ATC folder, rename existing USBigEnglish.gvp(n4gix)

Estonia FSX to P3D Migration Tool(EMT)--P3D2 support added with 26 Nov 13 Build--See http://www.flightsim.ee/

EZDOK--P3D beta version partially works, no exterior/world views-link at http://www.simforums...510.html#236510

FSRealTime--works (via FSUIPC) with standard installer and compatible version of FSUIPC running(Holland_Holland)

FSUIPC V4 -- P3D2 ready with version 4.923 or later--this is first P3D2-specific release of FSUIPC--previous versions were for P3D betas(Pete Dowson)

FSXFlight--works as-is(jaegerm)

PDFKneeboard--put pdfkneeboard.dll and .ini into modules folder, must add entry into dll.xml(muffo)  See http://forum.avsim.n...p3d-and-p3d-20/

LINDA -- Working in P3D2

Martin Boelens Simlauncher--compatible with a workaround--see http://forum.avsim.n...round-for-p3d2/

Mogwaisoft Shade v1.02--works with EMT--needs EMT running any time utility is used(spirit_66)

Plan-G--v3 works with P3D2 (Petraeus)

Scenery Config Editor--works with P3D (V1.1.2 tested)(w6kd)

Set P3D directory in the Flight Sim directory in preferences

Set location of scenery.cfg to "user defined" and browse to P3D scenery.cfg file, default location is C:\ProgramData\Lockheed Martin\Prepar3d v2\

TrackIR v4--works with or without EZDOK (waterman981)

v5--worksout of the box with 5.2.2 drivers, or with EZ_Dok beta referenced above or with OpusFSX(Jude Bradley)



Misc



Airtrack for iPad/iPhone--works with P3D2.  See: http://forum.avsim.n...-windows-81pro/

BA Virtual Phoenix ACARS--prohibited by EULA(MarkW)

Flying Tigers VA ACARS--P3D2 compatible(MarkW)

FS2Crew (AXE version)--P3D2 compatible(Jude Bradley)

FSCaptain--P3D2 compatible with V1.5.0--see http://fscaptain.pro...vailable-nov-27 (Dutch727)

FSCommander--works OK from remote PC using WideFS(RWFeldman)

IVAP V2--works, need to manually add Mtl traffic folder to p3d.cfg, remote ops needs port changed from 6809 to 49742(Wingcomm)

Multi Crew Environment--works with new P3D2 compatible installer

Radar Contact--works with P3D2 (with appropriate version of FSUIPC) on P3D machine or via network

VOXATC--works with manual install--requires 2 gauges copied from FSX, see discussion in unofficial VOXATC forum, P3D2 installer in work(Petraeus)



Hardware/drivers



nVidia video cards prior to GTX400 series, AMD/ATI cards prior to 5000 series -- incompatible (P3D2 requires DirectX 11)

nVidia 3D Vision 2--not working in P3D2--LM working with nVidia on this--see http://www.prepar3d.....0#postid-18692 (vr-pilot)





Known P3D Compatibility Issues affecting multiple add-ons:



1.  Global weather writes cause catastrophic high temp to be injected into sim--affects most weather add-ons, LM aware of issue

2.  A change in how a P3D internal state flag is set causes multiple FSX add-ons to crash when switching between full-screen, windowed, and/or minimized modes.

3.  A scenery visibility flag that was ignored by FSX/ESP is now properly observed, resulting in some default and add-on scenery taxiways to disappear.





"EMT" = Estonia Migration Tool

Je ne suis pas en mesure de credibiliser le contenu de cette page mais il me semble que c'est un bon repere quand on ne connait pas grands choses sur les addons cités.

Flighty