1.07 et 1.1 dans la foulée.

v1.1 (12/05/21)

TMS take-off callouts added: "TMS set to XX (if on)", "Power set, flex/N1 achieved"
Additional approach call-out added for glideslope intercept: "Glideslope alive, one dot to go"

v1.0.7 (11/05/21)

TMS: Limited the TMS actuators to avoid excessive values in some cases
Improved handling of custom liveries that do not follow the naming conventions
Jetway bridge attach points fixed
Custom altitude callouts added for approach
MWS logic improved, including automatic cancelling of red/amber warnings that are no longer active
N1 and TGT engine instrument bugs are now set automatically when clicking on the speed card

Dernière modification par Cedric (12-05-2021 12:20:18)

Now we can talk!

It was confirmed on Facebook that Just Flight will be bringing the custom FMC to the aircraft in an upcoming update that is due to release this month. In the post, Just Flight said that the custom FMC will come complete with functioning LNAV and VNAV integration and performance calculations. This will certainly make flying the aircraft a lot easier for those accustomed to those autopilot functions. In addition to the custom FMC, the team will also allow simmers to choose from the RealityXP GTN or have nothing at all. All of these options enable simmers to choose how they fly the iconic aircraft.

https://fselite.net/news/just-flight-14 … date-info/

Dernière modification par flighty (11-06-2021 00:40:34)

1.2 dispo! UFMC & compatibilité GTN750 au programme.

https://www.thresholdx.net/news/146v12

change log :

v1.2

-Included UFMC (Custom FMC) support
-Included support for 3rd party RealityXP GTN750 in 3D cockpit
-Fixed windshield reflections (no more "ghosting" of taxi lines or exterior reflections)
-Improved ASI bug manipulator logic
-Reconfigured positions of instrument displays for better use of panel texture space
-Created click spot on weather radar screen for 2D pop-up window.
-Improvements to TMS: Pressing an active mode or TOGA button will return TMS to standby and freeze actuators in place
-Improved TMS actuator simulation: blue up-arrows and white down-arrows will correctly show whether the pilot needs to increase or decrease throttles
-TMS actuators will now remain centered when the thrust levers are at idle
-TMS actuators movement rate is no longer dependent on frame rate
-Fixed engines #3 and #4 low oil temperature in flight after a cold-and-dark start
-Added custom commands for the throttle latches, eg. "thranda/switches/ThrottleLatch0"
-Improved yaw damper control authority
-Changed pulsating beacon to flashing beacon
-Improved Engine Overspeed test: If N1 is between 26 and 40%, this will shut down the engine. This can be reset by either re-starting the engine, or powering down the ESS DC bus.
-Fixed missing FUEL TRANSFER annunciators. They will now properly indicate the center tank transfer valve positions.
-Add missing altitude alert tones
-Fixed ghosting markers on clock
-Re-mapped TOGA button on throttles
-Oxygen test now requires oxygen valve to be open.
-Added Ground Power Unit model.
-Fixed potential negative values for airbrake angle when cold and dark with a tail wind.
-Added limiters to the fuel clickspots in the tablet to prevent over-filling.
-Reduced fuel flow at idle
-Fixed transponder code resetting to previous value if ENT key was pressed after entering the code
-Fixed interior of combi cargo version (Left Door closed from the inside)
-Fixed TMS error when adjusting TGT temp in TGT mode.
-Allowing for volume adjustments on vol knobs that are pushed in.

Dernière modification par Cedric (18-09-2021 17:57:09)