Vous n'êtes pas identifié.
slt
utilisation du kit dmjdemb120 flyawaysimulation
- Panel by David Mead
dans le kit.. 35446-emb120-4-x( avsim ru)
1° On utilise le aircraft (dmjdemb120 )avec ces modifs.....
[fltsim.x]
//PASTE YOUR AIRCRAFT DETAILS HERE
[fltsim.0]
title=EMB120ER Canarias Provincial
sim=PADemb120
model=
panel=
sound=AS
texture=canarias
kb_checklists=EMB120_check
kb_reference=EMB120_ref
atc_id=EC-LJX
ui_manufacturer=Embraer
atc_airline=regional
atc_flight_number=CAN16
atc_parking_types=ramp
ui_type=EMB 120 Brasilia
ui_variation=Canarias Provincial
prop_anim_ratio=1.015
description=The Embraer EMB 120 Brasilia is a twin-turboprop commuter airliner, produced by Embraer of Brazil.
It first flew on 27 July 1983, and entered commercial service in October 1985.
Since 1994, manufacture has focused exclusively on the EMB 120ER, with extended range (1,575 km) and increased capacity. It has a 30-passenger capacity.
et ou...!
dans aircraft.cfg (dmjdemb120)
Copier / Coller
contact_points
//Classes...What type of point 0=Unused or Ignore
// 1=Wheel
// 2=Scrape point
// 4=Float
// 5=Float Rudder
//0 Class
//1 Longitudinal Position (feet)
//2 Lateral Position (feet)
//3 Vertical Position (feet)
//4 Impact Damage Threshold (Feet Per Minute)
//5 Brake Map (0=None, 1=Left, 2=Right)
//6 Wheel Radius (feet)
//7 Steer Angle (degrees)
//8 Static Compression (feet) (0 if rigid)
//9 Max/Static Compression Ratio
//10 Damping Ratio / Water Rudder Effectiveness (0=Undamped, 1=Critically Damped) / 1.0 = normal
//11 Extension Time (seconds)
//12 Retraction Time (seconds)
//13 Sound Type
//14 Airspeed limit for retraction (KIAS)
//15 Airspeed that gear gets damage at (KIAS)
static_pitch = -1.000
static_cg_height = 6.100
gear_system_type=1
max_number_of_points=8
tailwheel_lock=0
point.0= 1, 20.198, 0.000, -6.100, 1181, 0, 0.750, 40.000, 0.292, 2.500, 0.952, 4.800, 4.800, 0, 184.2, 184.2
point.1= 1, -2.592, -10.800, -6.600, 1574, 1, 0.750, 0.000, 0.642, 2.500, 0.815, 4.500, 5.200, 2, 184.2, 184.2
point.2= 1, -2.592, 10.800, -6.600, 1574, 2, 0.750, 0.000, 0.642, 2.500, 0.815, 4.800, 4.900, 3, 184.2, 184.2
point.3= 2, -2.200, -29.300, 3.200, 2361, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 5
point.4= 2, -2.200, 29.300, 3.200, 2361, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 6
point.5= 2, -35.000, 0.000, 11.000, 2361, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 9
point.6= 2, 23.600, -0.000, -0.500, 1575, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 4
point.7= 5, 10.600, -0.000, -0.500, 1575, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 4
[Views]
eyepoint=15.000,-1.100,3.000
****************************************
panel cfg (dmjdemb120)
//--------------------------------------------------------
[Windowxx]
file=overhead.bmp
Background_color=0,0,0
size_mm=640
position=0
visible=0
ident=10001
sizeable=1
nomenu=0
gauge00=EMB120b!OH_Electrical_Panel, 0,0,160,228
gauge01=EMB120b!OH_Lights_Panel, 1,232,159,123
gauge02=EMB120b!OH_APU_Panel, 159,0,156,132
gauge03=EMB120b!OH_Engine_Panel, 160,131,156,220
gauge04=EMB120b!OH_Hydraulic_Panel, 316,1,159,353
gauge05=EMB120b!OH_Ice_Panel, 475,0,165,215
gauge06=EMB120b!OH_Pneumatic_Panel, 477,212,162,144
gauge07=EMB120b!Annunciator, 112,382,353,80
Dernière modification par esmdu (21-05-2017 09:26:14)
Hors ligne
re
ok avec le panel VC du kit de base....
avec d'autres gauges(pfd,mfd etc il faudra retoucher certains swithes)
Hors ligne
re
Hors ligne
re
simplification du panel OVH
Dernière modification par esmdu (23-05-2017 11:48:35)
Hors ligne
re
Hors ligne
re
avec Paint.net(free)
Hors ligne