[FSX] iFly 737NG. SP1 disponible !

lumat · [↑]

Voilà le lien

http://ifly.flight1.net/forums/forum_posts.asp?TID=4749&title=fsx-service-pack-released

La liste des améliorations :

Fix List:
Only the items listed are included, if an item you were concerned about is not mentioned then it is not included in the SP and will be added to the Feature Pack. Please do not post about any items not on this list, save those post for the development forum.

1. Update the MCP altitude acquisition/deviation alert logic. 1). Alt alert sound should have a 3sec delay(not 5 sec); 2). In level flight, the alert triggered is also the steady white acquisition alert and not the flashing amber deviation alert.
2. Displays CMD as soon as the second AP is engaged. The CMD should display until the second autopilot really engages (below 1500ft AGL - appearance of FLARE armed in white)
3. CDU CLR key can't be controlled by hotkey
4. Re-check the VNAV logic.
5. Sometimes, "LVL change 400fpm for short climb/descent" does not work.
6. Use 3 seperate altimeters for captain/fo/standby panel. Add ALT DISAGREE alert, display when capt/fo altitude disagree more than 200ft and more than 5 second.
7. Standby altimeter with altitude error.
8. Clicking on 2500FT, 200FT or 20FT at SIMU Menu--Style page does not open the corresponding menu but redirects you to the previous option you opened.
9. The cabin may still pressurizes even with both packs are all off
10.If in vc mode and there is no tower view available and select tower view from fs menu, then back to vc mode, all screens will blank until press "F9" or use "S" to re-select vc.
11.Two independent turnoff lights
12.FMC does not calculate T/D if there is no runway in the route
13.Update the APU FF logic.
14.Add lights test switch
15.If open simconnect log mode, there will be many exception error in log file.
16.Update the model
17.Add more options in the style menu.
18. The strange characters on the N1 limit page are back, this occurs when i load the "normal" panel state.
19. Spelling mistake on the lights test panel.
20. No automatic auto-thrust reduction if automatic thrust reduction selected.
21. IRS alignment time option works incorrectly.
22. Brake temp sensor is not correctly modelled.
23. If N1 set knob is not at AUTO mode, the N1 may excess the limit.
24. Change the cabin altitude logic, if loss bleedair/pack, the system use about 1500~1800vs to loss pressure.
25. Update the gear brake cooling rates
26. Change the N1 limit logic. A) With AT ON, N1 will not exceed green N1 limit. B) With AT OFF and EEC in normal, N1 will not exceed amber N1 limit. C) With AT OFF and EEC in ALTN, N1 can exceed amber N1 limit. D) The manually set N1 value has no effect on AT operation
27. GPWS provides height callouts based on the altitude set by the Captain's Minimums selector.
28. Re-build the logic for A/T engage/disengage, during VNAV PTH
29. When FD takeoff mode and cross thrust reduction altitude, and with auto thrust reduction mode ON, the A/T should engaged from ARM to N1, while N1 switch at MCP not light up.
30. DECEL point also available for way-point speed constraint.
31. Modify Approach Logic
32. Re-build G/A logic
33. GPWS sensitivity readjusted

VC Mouse Issue

Despite support from other developers we have not been able to fix the VC Mouse issue. Using a external frame rate limiter does improve things on pc's with the issue but does not prevent it. We have managed to squeeze some more frame rates from the aircraft and the testers are seeing approximately 15% improvement. While this does not seem much on low spec systems it does make things visibly smoother which is the aim at the end of the day for the aircraft to run smoothly and not being fixated on frame rates. A good example of this was on my top machine the external model runs over 120FPS but that creates a stutter until you limit the frames. With the frame per second limited it then becomes smooth as silk.
Luc

papa33 · [↑]

Merci pour l'info !
Christian

aeronef · [↑]

hello
je trouve pas beaucoup de sujet sur le ifly 737 je ne le possède pas, je crois que beaucoup de simmers attendant le 737 pmdg

@+

ymu · [↑]

merci pour l'info... installé par encore testé

BERDE · [↑]

Bonsoir !

Merci bien pour l'info ; j'installe çà de suite .

Bernard .

lumat · [↑]

Ca a l'air d'être un peu mieux qu'avant, question framerate. quelques fps en plus. Encore derrière le J41 de PMDG, cependant.

Je n'ai pas testé plus avant, manque de temps.....

luc

Dernière modification par lumat (18-07-2011 19:00:31)

#1 [↑][↓] 18-07-2011 06:06:45

[FSX] iFly 737NG. SP1 disponible !

#2 [↑][↓] 18-07-2011 08:34:39

Re : [FSX] iFly 737NG. SP1 disponible !

#3 [↑][↓] 18-07-2011 17:07:08

Re : [FSX] iFly 737NG. SP1 disponible !

#4 [↑][↓] 18-07-2011 17:20:08

Re : [FSX] iFly 737NG. SP1 disponible !

#5 [↑][↓] 18-07-2011 17:44:27

Re : [FSX] iFly 737NG. SP1 disponible !

#6 [↑][↓] 18-07-2011 19:00:06

Re : [FSX] iFly 737NG. SP1 disponible !

Pied de page des forums