Vous n'êtes pas identifié(e).
Pages : 1
Salut tout le monde
Je viens de m'offrir le F14 PRO de chez Iris à un peu moins de 10 euros sur Simmarket.
Une petite question.
Avec mes autres avions (notamment T45 et F14 de Dino) j'obtiens sur les fréquences 111.00 et 112.00 le TACAN et l'ILS des, respectivement, PA natifs de FS et des PA de Javier (Nimitz et Ike).
Avec le F14 de Iris, rien.
J'ai cru comprendre que ce problème était connu mais je trouve bizarre que personne n'ai réussi à le résoudre...
Merci
Hors ligne
Bonsoir,
As-tu téléchargé l'Update : http://www.irissimulations.com/hotfix/hf_f14_150.exe ?
Sais-ton jamais...
A moins que tu l'aies déjà .
Chris.
Hors ligne
Bonjour,
A propos de ton souci j'ai peut-être trouvé la SOLUTION sur http://www.sim-outhouse.com/sohforums/showthread.php?60705-Iris-Pro-series-F-14-I-need-help-please :
By coincidence, I have just been flying the IRIS F-14A/B Pro extensivley over the past couple of weeks. Also been flying and comparing it with Dino Cattaneo's F-14D. Each has different pros' and cons'. The main focus of this exercise was to evaluate and tweak the carrier TACAN avionics available and learing how to use this to find the carriers e.g. in the dark and/or foul weather. In the course of this, from a purely aesthetic standpoint, you become transfixed with how graceful and beguiling the Tomcat design was, and what a great job both IRIS and Dino did with their visual models.
Here is what I did:
1. Download the TACAN gauge by Sylvain availabe here http://royalefrenchnavy.gratisim.fr/Creations/Gauge_RFN_CarrierOperations_V221.zip and install it as a pop up gauge in your IRIS F-14 panel.cfg. Note the entries for radio frequencies that go in the VC section of your panel.cfg. These give you a choice of setting the TACAN to work from either NAV1 or NAV2. In my experience, both will enable the gauge to point to the carrier and display the distance to it (so I can e.g. set NAV1 for 112 and NAV2 for 111 - so if there are any moving default carriers around, it will point to them as well).
2 Copy and paste into your panel.cfg the BendixKing radio stack/AP from the default Cessna/Baron etc - also used in many other freeware planes. I almost always do this to get a simple to use autopilot and radio. Can't remember which F-14, but I think one of them - maybe IRIS - would not let me change the NAV frequency displayed I think on the left console, perhaps as you are also finding. Anyway, the Bendix radio stack allowed me to tune the frequency to 112 for Javier's Nimitz and the TACAN guage would then find this and e.g. the Foch/Clem without a problem.
FYI - I added the "Realistic F/A-18 HUD for Dino Cattaneo" [i.e., his F-14D] done by Jivko Rusev at simviation.com to the Dino F-14, because it has a built in TACAN feature that displays the distance to the carrier and direction arrow for its heading right in the HUD. I then went a further step, and merged this whole VC - with the HUD/TACAN feature - into the IRIS aircraft. There were the usual steps involved with merging a native FSX VC in a different aircraft, and I also ended up de-activating the IRIS AP (it is well and realistically modelled, but I need one I can engage more easily/quickly) in the IRIS xml gauges, which allowed preserving the nice IRIS F-14 light functionality. Result: a great piece of air superiority kit for all weather carrier ops.
Like you, I tend to prefer the non-factory fresh paints, but those can also be over done. The best ones have more sublte grease stains and smudges etc. There is one I have for the IRIS F-14 for VF-124 Ghost Riders which is my favorite, but I could not find it - and one or two others I like and have in my file - anywhere on the net currently. May have been done by Banana Bob (or Yago?) and no longer available? Scott Minty did a whole bunch of IRIS paints - factory fresh variety - and I like and have several of these in my short list.
Let me know how you get on.
Si après cela il y a encore ton souci, il faut lire les autres pages de ce topic... http://www.sim-outhouse.com/sohforums/showthread.php?60705-Iris-Pro-series-F-14-I-need-help-please
Cela m'intéresse aussi car j'ai acheté récemment ce Tomcat... mais je n'ai pas eu encore le temps de réinstaller sur mon nouveau PC, tout ce qui concerne l'Aéronavale...
Cordialement.
Chris.
Dernière modification par FanofAviation28 (25-01-2012 13:13:16)
Hors ligne
...
Après avoir téléchargé le TACAN gauge sur : http://royalefrenchnavy.gratisim.fr/Creations/Gauge_RFN_CarrierOperations_V221.zip
Lis attentivement le fichier lisez-moi et le dossier documentation ... La solution est certainement quelque part par lÃ
J'ai lu aussi sur un post qu'il ne faut pas se tromper entre NAV et COM en affichant les fréquences 111.00 et 112.00...
Bonne chance.
Chris
Dernière modification par FanofAviation28 (25-01-2012 23:17:48)
Hors ligne
En cas de problème avec la gauge Tacan RFN, vous pouvez nous joindre sur ce topic
http://www.pilote-virtuel.com/viewtopic.php?id=37114
ou sur celui-lÃ
http://www.pilote-virtuel.com/viewtopic.php?id=16218&p=86
Michel
Dernière modification par micpni (29-01-2012 08:19:42)
Hors ligne
En cas de problème avec la gauge Tacan RFN, vous pouvez nous joindre sur ce topic
http://www.pilote-virtuel.com/viewtopic.php?id=37114
ou sur celui-lÃ
http://www.pilote-virtuel.com/viewtopic.php?id=16218&p=86
Michel
Bonjour Michel,
Fais-tu partie de the Dream Team of RFN ?..
J'adore vraiment ce site complet sur l'aéronavale pour FSX !!
Bravissimo pour tout ce qu'il y a dessus : l’Étendard, une vraie merveille et pas si complexe que ça à piloter, hum... pour l'instant en simples tours de piste... et les nombreux utilitaires et porte-avions... Que du bonheur !!
Merci de ce post.
Très cordialement
Chris.
Dernière modification par FanofAviation28 (29-01-2012 10:22:12)
Hors ligne
Sony nous a passé la main pour RFN. On essaie d'en maintenir l'esprit. Et ça tombe bien car on en a beaucoup été imprégné par le passé... Fro' développe les modèles (ETD, Clem, Foch, miroir, gauge RFN, ...) et je mets le site à jour (avec les tutoriels, lisezmoi, trafics, quelques missions, ...). Un vrai "travail" en concertation et aussi avec toute l'équipe de Restauravia. http://restauravia.com/page2.html
Michel
Dernière modification par micpni (29-01-2012 22:17:06)
Hors ligne
Un vrai "travail" en concertation et aussi avec toute l'équipe de Restauravia. http://restauravia.com/page2.html
Michel
... Si vous "bossez" ensemble pour notre plus grand bonheur... C'est pretty cool
MERCI pour tout ce que vous faites.
Bonne continuation et bons vols.
Chris.
Hors ligne
Pages : 1