Vous n'êtes pas identifié(e).
Bonjour,
J'ai mergé le model du project sur l'airbus wilco mais l'A319 semble piqué.
J'ai suivi le tuto et j'ai remplacé les points de contacts du wilco avec ceux du project A319.
Si quelqu'un a la solution
[contact_points]
static_pitch=-0.319722
static_cg_height=11.60811023622point.0=1.0, 32.83, 0.0000,-11.72, 800,0.0,1.5,68.0,0.70,1.4390000,0.68,13.200000,12.900000,0.000000,252.000000,282.000000
point.1=1.0,-4.160,-12.458,-12.22,1200,1.0,1.9,0.00,0.72,1.5419948,0.81,14.000000,13.700000,2.000000,252.000000,282.000000
point.2=1.0,-4.160, 12.458,-12.22,1200,2.0,1.9,0.00,0.72,1.5419948,0.80,14.200000,13.300000,3.000000,252.000000,282.000000
point.3=2.0,-13.750000,-54.583333,-0.500000,750.924659,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,5.000000,0.000000,0.000000
point.4=2.0,-13.750000,54.583333,-0.500000,750.924659,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,6.0,0.0,0.0
point.5=2.0,-63.250000,0.0,4.050,750.924659,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,9.0,0.0,0.0
point.6=2.0,46.666667,0.0,-4.166667,750.924659,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,4.0,0.0,0.0
point.7=5.0,-3.000, 0,0000,0.0000, 1600, 0, 0.00, 50.0, 0.0, 0.0, 1.00, 0.2, 0.2, 0, 0.0, 0.0
gear_system_type=0
Merci
Dernière modification par Jules744 (29-03-2012 17:18:58)
Hors ligne