Vous n'êtes pas identifié(e).
- Contributions : Récentes | Sans réponse
Pages : 1
#2 [↑][↓] 21-02-2013 13:00:31
Re : [FSX]Recherche C177
Il y a un cardinal chez Flight1, mais pas RG , sinon en free un modèle existe :
Dernière modification par Avenger (21-02-2013 13:01:28)
Ryzen 2200G / SSD 500 / GTX 1050 4G MSI /16G/ W10 / P3D 4.5
"Par ici, à chaque arrêt de bus on a l'habitude de descendre boire un coup . Mine de rien ça fait du 2 ou 3 litres au 100 ! "
Hors ligne
#3 [↑][↓] 21-02-2013 13:01:34
- ChD
- Membre
- Lieu : proche LFPN
- Inscription : 15-04-2008
Re : [FSX]Recherche C177
Salut,
Si tu attends un peu, tu devrais en avoir un très beau dans peu de temps :
http://forum.gmax-ac.fr/viewtopic.php?f=3&t=2503
(Pour le moment, ce n'est pas la version RG, mais si l'auteur est motivé, ça devrait être faisable.)
Christophe
Hors ligne
#6 [↑][↓] 21-02-2013 13:44:33
- Lagaffe
- Membre
- Lieu : LFPO / retraité
- Inscription : 13-03-2008
Re : [FSX]Recherche C177
Christophe, va voir le lien de simviation, il est question de GMax, mais il semble complet..?
Pas exactement, il a été fait .... avec Gmax mais ne contient pas les sources
@+ Didier
W10 Pro 64b Build 22H2 - Boitier HAF 932 - Z390 STRIX-F - 9900K - 2x16 Go - NVidia 3060 Ti 8 Go - Alim Corsair 800W - Ecran 34" - NVidia Studio ready 536.23
P3D v5.4 = http://www.pilote-virtuel.com/img/members/53/P3Dv5HF-Reglages-A.jpg - MSFS Deluxe/STORE - X-Plane 12B
Hors ligne
#7 [↑][↓] 21-02-2013 13:46:58
- ChD
- Membre
- Lieu : proche LFPN
- Inscription : 15-04-2008
Re : [FSX]Recherche C177
En effet, à regarder vite fait le contenu de l'archive, il a l'air pas mal, mais sans les sources comme le fait remarquer Didier. Ce qui ne l'empêchera pas de voler !
Si Pegase33 le teste, il pourra nous donner son avis.
Christophe
Hors ligne
#8 [↑][↓] 21-02-2013 13:47:31
Re : [FSX]Recherche C177
Christophe, va voir le lien de simviation, il est question de GMax, mais il semble complet..?
bonjour à tous,
Pour l'avoir dans mon hangar, je confirme qu'il est très complet, avec un bon modèle de vol et son VC est également très bien fait. Le seul souci rencontré est que les phares n'éclairent pas le sol. Excellente machine !!
Cessna 177RG
Thank you for downloading my FSX model of the Cessna 177RG. It's been a special project for me, as it's based on the real airplane in which I earned my complex endorsement. N177MJ and I have been through a lot together. I've flown her all over the country... including the 2006 trip to Airventure in Oshkosh, Wisconsin. The infamous trip where the landing gear failed to deploy during our first fuel-stop in Warsaw, Indiana. All went well after the emergency pump secured all three wheels, "down and green"... except for spending three-plus hours getting her repaired (photos included).
My number one priority in making this model, was to deliver very realistic flight dynamics. During extensive testing, I've found that there is a large difference in perceived handling between 2D and virtual cockpits... So this plane was designed to be flow from the VC. The 2D panel is functional (and photo based), but it's difficult to fly from there, smoothly and realistically.
I also highly recommend that it be flown with yoke and pedals. It's not a docile trainer; you must fly her with rudder input, or you'll be slipping and sliding all over the sky. Twisting joysticks "work", but not very well. Landing N177MJ realistically, in a good crosswind, with no pedals is not an easy task.
If you've ever flown a Cardinal, you'll find the performance, feel, fuel-consumption and instrument feedback to be dead-on accurate. Let the airspeed fall below 75knots on final and she'll start coming down, fast. Keep it much above 85knots and she'll float like a boat down the runway.
From the virtual cockpit, takeoff trim for two, 200lb, front-seat occupants and full fuel is oriented from the pilot's view. Just line up the markings. Adjust accordingly for different loadings. Normal takeoffs call for 10 degrees of flaps... at 70kias, just take a little weight of the nose-wheel and she'll lift off nice and smooth.
The fuel tank selector (my first modeled gauge) is on the floor. The trim wheel and cowl-flap lever are on the lower center console... and the master avionics switch is way over in front of the right seat (just like the real plane).
Installation: Extract directly into your FSX Airplanes folder.. That's it !
Enjoy ! .. And please email me with any questions or comments.
Brett Henderson .. bc.henderson@sbcglobal.net
Win 10 Pro (1803); X-Plane 10-51 et XP11-50r3
i5 4590 3.3Ghz/ H97 / 16 Go DDR3-1600Mhz / GTX660 MSI / SSD 850EVO-120Go / HDD WD Blue 64/1T Mo-7200RPM / Iiyama B2480HS-B1 / Saitek yoke+gaz+palonnier
Hors ligne
#9 [↑][↓] 21-02-2013 14:34:48
- Daube
- Membre
- Inscription : 31-10-2008
Re : [FSX]Recherche C177
D'ailleurs, si je me souviens bien, ce Cessna 177 fut l'un des tous premiers avions freewares en version native FSX.
Core i7 8700k, 32 Gb de RAM, NVidia GTX 1070-ti, Windows 10 64, Casque VR Pico 4
Hors ligne
Pages : 1